International
Tables for
Crystallography
Volume D
Physical properties of crystals
Edited by A. Authier

International Tables for Crystallography (2013). Vol. D, ch. 1.1, pp. 8-9

Section 1.1.3.5.2. Representation surfaces of second-rank tensors

A. Authiera*

aInstitut de Minéralogie et de Physique des Milieux Condensés, 4 Place Jussieu, 75005 Paris, France
Correspondence e-mail: aauthier@wanadoo.fr

1.1.3.5.2. Representation surfaces of second-rank tensors

| top | pdf |

The representation surfaces of second-rank tensors are quadrics. The directions of their principal axes are obtained as follows. Let [t_{ij}] be a second-rank tensor and let [{\bf OM} = {\bf r}] be a vector with coordinates [x_{i}]. The doubly contracted product, [t_{ij}x^{i}x\hskip1pt^{j}], is a scalar. The locus of points M such that [t_{ij}x^{i}x\hskip1pt^{j} = 1]is a quadric. Its principal axes are along the directions of the eigenvectors of the matrix with elements [t_{ij}]. They are solutions of the set of equations [t_{ij}x^{i} = \lambda x\hskip1pt^{j},]where the associated quantities λ are the eigenvalues.

Let us take as axes the principal axes. The equation of the quadric reduces to [t_{11}(x^{1})^{2} + t_{22}(x^{2})^{2} + t_{33}(x^{3})^{2} = 1.]

If the eigenvalues are all of the same sign, the quadric is an ellipsoid; if two are positive and one is negative, the quadric is a hyperboloid with one sheet; if one is positive and two are negative, the quadric is a hyperboloid with two sheets (see Section 1.3.1[link] ).

Associated quadrics are very useful for the geometric representation of physical properties characterized by a tensor of rank 2, as shown by the following examples:

  • (i) Index of refraction of a medium. It is related to the dielectric constant by [n = \varepsilon^{1/2}] and, like it, it is a tensor of rank 2. Its associated quadric is an ellipsoid, the optical indicatrix, which represents its variations with the direction in space (see Section 1.6.3.2[link] ).

  • (ii) Thermal expansion. If one cuts a sphere in a medium whose thermal expansion is anisotropic, and if one changes the temperature, the sphere becomes an ellipsoid. Thermal expansion is therefore represented by a tensor of rank 2 (see Chapter 1.4[link] ).

  • (iii) Thermal conductivity. Let us place a drop of wax on a plate of gypsum, and then apply a hot point at the centre. There appears a halo where the wax has melted: it is elliptical, indicating anisotropic conduction. Thermal conductivity is represented by a tensor of rank 2 and the elliptical halo of molten wax corresponds to the intersection of the associated ellipsoid with the plane of the plate of gypsum.








































to end of page
to top of page