International
Tables for Crystallography Volume D Physical properties of crystals Edited by A. Authier © International Union of Crystallography 2013 |
International Tables for Crystallography (2013). Vol. D, ch. 1.4, pp. 101-102
Section 1.4.2. Grüneisen relation^{a}Institut für Geowissenshaften, Universität Kiel, Olshausenstrasse 40, D-24098 Kiel, Germany |
Thermal expansion of a solid is a consequence of the anharmonicity of interatomic forces (see also Section 2.1.2.8 ). If the potentials were harmonic, the atoms would oscillate (even with large amplitudes) symmetrically about their equilibrium positions and their mean central position would remain unchanged. In order to describe thermal expansion, the anharmonicity is most conveniently accounted for by means of the so-called `quasiharmonic approximation', assuming the lattice vibration frequencies ω to be independent of temperature but dependent on volume . Anharmonicity is taken into account by letting the crystal expand, but it is assumed that the atoms vibrate about their new equilibrium positions harmonically, i.e. lattice dynamics are still treated in the harmonic approximation. The assumption , which is made for the harmonic oscillator, is a generalization of the postulate that the frequency of a harmonic oscillator does not depend on the amplitude of vibration.
This approach leads, as demonstrated below, to the Grüneisen relation, which combines thermal expansion with other material constants and, additionally, gives an approximate description of the temperature dependence of thermal expansion (cf. Krishnan et al., 1979; Barron, 1998).
For isotropic media, the volume expansion , cf. (1.4.1.2), can be expressed by the thermodynamic relation κ being the isothermal compressibility. To obtain the quantity , the pressure p is deduced from the free energy F, whose differential is , i.e. from In a crystal consisting of N unit cells with p atoms in each unit cell, there are 3p normal modes with frequencies (denoted by an index s running from 1 to 3p) and with N allowed wavevectors (denoted by an index t running from 1 to N). Each normal mode contributes to the free energy by the amount The total free energy amounts, therefore, to From (1.4.2.2) The last term can be written as where is the Bose–Einstein distribution
Differentiation of (1.4.2.5) and (1.4.2.6) with respect to temperature at constant volume [see (1.4.2.1)] yields with This quantity, (the Einstein function), is the well known contribution of the normal mode to the specific heat (at constant volume): Equation (1.4.2.8) can be simplified by the introduction of an `individual Grüneisen parameter' for each normal mode : Equation (1.4.2.8) then reads [with (1.4.2.1)] Based on these individual parameters , an average (or overall mode-independent) Grüneisen parameter can be defined as In this averaging process, the contribution of each normal mode to is weighted in the same way as it contributes to the specific heat [see (1.4.2.10)]. Equations (1.4.2.12) and (1.4.2.13) lead to the Grüneisen relation The above derivation was made for isotropic media. For anisotropic media, is replaced by the strain and is replaced by the stiffness tensor [cf. Chapter 2.1 and equation (2.1.2.75) ]. Then the Grüneisen parameter turns out to be a second-rank tensor : In the Debye approximation, the mode frequencies scale linearly with the cut-off frequency . Therefore, with , the average isotropic Grüneisen parameter is calculated to be Since, in the Debye theory, is independent of temperature, turns out to be independent of temperature. As κ and V are only weakly temperature dependent, the thermal expansion β should then, according to (1.4.2.14), roughly behave like , i.e. β should be proportional to at very low temperatures, and should be approximately constant for (the Dulong–Petit law). This behaviour is found to be approximately satisfied for many compounds, even with different types of interatomic interaction, and γ takes values roughly between 1 and 2. Even in the case of crystals with highly anisotropic elastic and thermal behaviour, the three principal values of the tensor [(1.4.2.15)] are comparably uniform, having values of about 2 (Küppers, 1974).
Effectively, γ shows a certain more or less pronounced dependence on temperature. The individual are assumed to be temperature independent. However, being an average over the whole spectrum of excited modes [cf. (1.4.2.13)], will not necessarily have the same value at low temperatures (when only low frequencies are excited) as at high temperatures (when all modes are excited). Two limiting cases can be considered:
In metals, the conduction electrons and magnetic interactions yield contributions to the free energy and to the specific heat. Accordingly, expression (1.4.2.14) can be augmented by introduction of an `electronic Grüneisen parameter', , and a `magnetic Grüneisen parameter', , in addition to the `lattice Grüneisen parameter', , considered so far:
References
Barron, T. H. K. (1998). Generalized theory of thermal expansion of solids. In Thermal expansion of solids, edited by C. Y. Ho, ch. 1. Materials Park, Ohio: ASM International.Krishnan, R. S., Srinivasan, R. & Devanarayanan, S. (1979). Thermal expansion of solids. Oxford: Pergamon.
Küppers, H. (1974). Anisotropy of thermal expansion of ammonium and potassium oxalates. Z. Kristallogr. 140, 393–398.