International
Tables for
Crystallography
Volume F
Crystallography of biological macromolecules
Edited by M. G. Rossmann and E. Arnold

International Tables for Crystallography (2006). Vol. F, ch. 1.2, pp. 5-7   | 1 | 2 |

Section 1.2.4. Globular proteins in the 1950s

M. G. Rossmanna*

aDepartment of Biological Sciences, Purdue University, West Lafayette, IN 47907-1392, USA
Correspondence e-mail: mgr@indiana.bio.purdue.edu

1.2.4. Globular proteins in the 1950s

| top | pdf |

In 1936, Max Perutz had joined Sir Lawrence Bragg in Cambridge. Inspired in part by Keilin (Perutz, 1997[link]), Perutz started to study crystalline haemoglobin. This work was interrupted by World War II, but once the war was over Perutz tenaciously developed a series of highly ingenious techniques. All of these procedures have their counterparts in modern `protein crystallography', although few today recognize their real origin.

The first of these methods was the use of `shrinkage' stages (Perutz, 1946[link]; Bragg & Perutz, 1952[link]). It had been noted by Bernal and Crowfoot (Hodgkin) in their study of pepsin that crystals of proteins deteriorate on exposure to air. Perutz examined crystals of horse haemoglobin after they were air-dried for short periods of time and then sealed in capillaries. He found that there were at least seven consecutive discrete shrinkage stages of the unit cell. He realized that each shrinkage stage permitted the sampling of the molecular transform at successive positions, thus permitting him to map the variation of the continuous transform. As he examined only the centric (h0l) reflections of the monoclinic crystals, he could observe when the sign changed from 0 to π in the centric projection (Fig. 1.2.4.1[link]). Thus, he was able to determine the phases (signs) of the central part of the (h0l) reciprocal lattice. This technique is essentially identical to the use of diffraction data from different unit cells for averaging electron density in the `modern' molecular replacement method. In the haemoglobin case, Patterson projections had shown that the molecules maintained their orientation relative to the a axis as the crystals shrank, but in the more general molecular replacement case, it is necessary to determine the relative orientations of the molecules in each cell.

[Figure 1.2.4.1]

Figure 1.2.4.1 | top | pdf |

Change of structure amplitude for horse haemoglobin as a function of salt concentration in the suspension medium of the low-order h0l reflections at various lattice shrinkage stages (C, C′, D, E, F, G, H, J). Reprinted with permission from Perutz (1954)[link]. Copyright (1954) Royal Society of London.

The second of Perutz's techniques depended on observing changes in the intensities of low-order reflections when the concentration of the dissolved salts (e.g. Cs2SO4) in the solution between the crystallized molecules was altered (Boyes-Watson et al., 1947[link]; Perutz, 1954[link]). The differences in structure amplitude, taken together with the previously determined signs, could then map out the parts of the crystal unit cell occupied by the haemoglobin molecule. In many respects, this procedure has its equivalent in `solvent flattening' used extensively in `modern' protein crystallography.

The third of Perutz's innovations was the isomorphous replacement method (Green et al., 1954[link]). The origin of the isomorphous replacement method goes back to the beginnings of X-ray crystallography when Bragg compared the diffracted intensities from crystals of NaCl and KCl. J. Monteath Robertson explored the procedure a little further in his studies of phthalocyanines. Perutz used a well known fact that dyes could be diffused into protein crystals, and, hence, heavy-atom compounds might also diffuse into and bind to specific residues in the protein. Nevertheless, the sceptics questioned whether even the heaviest atoms could make a measurable difference to the X-ray diffraction pattern of a protein.2 Perutz therefore developed an instrument which quantitatively recorded the blackening caused by the reflected X-ray beam on a film. He also showed that the effect of specifically bound atoms could be observed visually on a film record of a diffraction pattern. In 1953, this resulted in a complete sign determination of the (h0l) horse haemoglobin structure amplitudes (Green et al., 1954[link]). However, not surprisingly, the projection of the molecule was not very interesting, making it necessary to extend the procedure to noncentric, three-dimensional data. It took another five years to determine the first globular protein structure to near atomic resolution.

In 1950, David Harker was awarded one million US dollars to study the structure of proteins. He worked first at the Brooklyn Polytechnic Institute in New York and later at the Roswell Park Cancer Institute in Buffalo, New York. He proposed to solve the structure of proteins on the assumption that they consisted of `globs' which he could treat as single atoms; therefore, he could solve the structure by using his inequalities (Harker & Kasper, 1947[link]), i.e., by direct methods. He was aware of the need to use three-dimensional data, which meant a full phase determination, rather than the sign determination of two-dimensional projection data on which Perutz had concentrated. Harker therefore decided to develop automatic diffractometers, as opposed to the film methods being used at Cambridge. In 1956, he published a procedure for plotting the isomorphous data of each reflection in a simple graphical manner that allowed an easy determination of its phase (Harker, 1956[link]). Unfortunately, the error associated with the data tended to create a lot of uncertainty.

In the first systematic phase determination of a protein, namely that of myoglobin, phase estimates were made for about 400 reflections. In order to remove subjectivity, independent estimates were made by Kendrew and Bragg by visual inspection of the Harker diagram for each reflection. These were later compared before computing an electron-density map. This process was put onto a more objective basis by calculating phase probabilities, as described by Blow & Crick (1959[link]) and Dickerson et al. (1961[link]).

One problem with the isomorphous replacement method was the determination of accurate parameters that described the heavy-atom replacements. Centric projections were a means of directly determining the coordinates, but no satisfactory method was available to determine the relative positions of atoms in different derivatives when there were no centric projections. In particular, it was necessary to establish the relative y coordinates for the heavy-atom sites in the various derivatives of monoclinic myoglobin and in monoclinic horse haemoglobin. Perutz (1956[link]) and Bragg (1958[link]) had each proposed solutions to this problem, but these were not entirely satisfactory. Consequently, it was necessary to average the results of different methods to determine the 6 Å phases for myoglobin. However, this problem was solved satisfactorily in the structure determination of haemoglobin by using an [(F_{\rm H1} - F_{\rm H2})^{2}] Patterson-like synthesis in which the vectors between atoms in the two heavy-atom compounds, H1 and H2, produce negative peaks (Rossmann, 1960[link]). This technique also gave rise to the first least-squares refinement procedure to determine the parameters that define each heavy atom.

Perutz used punched cards to compute the first three-dimensional Patterson map of haemoglobin. This was a tremendous computational undertaking. However, the first digital electronic computers started to appear in the early to mid-1950s. The EDSAC1 and EDSAC2 machines were built in the Mathematical Laboratory of Cambridge University. EDSAC1 was used by John Kendrew for the 6 Å-resolution map of myoglobin (Bluhm et al., 1958[link]). EDSAC2 came on-line in 1958 and was the computer on which all the calculations were made for the 5.5 Å map of haemoglobin (Cullis et al., 1962[link]) and the 2.0 Å map of myoglobin. It was the tool on which many of the now well established crystallographic techniques were initially developed. By about 1960, the home-built, one-of-a-kind machines were starting to be replaced by commercial machines. Large mainframe IBM computers (704, 709 etc.), together with FORTRAN as a symbolic language, became available.

References

Blow, D. M. & Crick, F. H. C. (1959). The treatment of errors in the isomorphous replacement method. Acta Cryst. 12, 794–802.
Bluhm, M. M., Bodo, G., Dintzis, H. M. & Kendrew, J. C. (1958). The crystal structure of myoglobin. IV. A Fourier projection of sperm-whale myoglobin by the method of isomorphous replacement. Proc. R. Soc. London Ser. A, 246, 369–389.
Boyes-Watson, J., Davidson, E. & Perutz, M. F. (1947). An X-ray study of horse methaemoglobin. I. Proc. R. Soc. London Ser. A, 191, 83–132.
Bragg, L. & Perutz, M. F. (1952). The structure of haemoglobin. Proc. R. Soc. London Ser. A, 213, 425–435.
Bragg, W. L. (1958). The determination of the coordinates of heavy atoms in protein crystals. Acta Cryst. 11, 70–75.
Cullis, A. F., Muirhead, H., Perutz, M. F., Rossmann, M. G. & North, A. C. T. (1962). The structure of haemoglobin. IX. A three-dimensional Fourier synthesis at 5.5 Å resolution: description of the structure. Proc. R. Soc. London Ser. A, 265, 161–187.
Dickerson, R. E., Kendrew, J. C. & Strandberg, B. E. (1961). The crystal structure of myoglobin: phase determination to a resolution of 2 Å by the method of isomorphous replacement. Acta Cryst. 14, 1188–1195.
Green, D. W., Ingram, V. M. & Perutz, M. F. (1954). The structure of haemoglobin. IV. Sign determination by the isomorphous replacement method. Proc. R. Soc. London Ser. A, 225, 287–307.
Harker, D. (1956). The determination of the phases of the structure factors of non-centrosymmetric crystals by the method of double isomorphous replacement. Acta Cryst. 9, 1–9.
Harker, D. & Kasper, J. S. (1947). Phases of Fourier coefficients directly from crystal diffraction data. J. Chem. Phys. 15, 882–884.
Perutz, M. F. (1946). Trans. Faraday Soc. 42B, 187.
Perutz, M. F. (1954). The structure of haemoglobin. III. Direct determination of the molecular transform. Proc. R. Soc. London Ser. A, 225, 264–286.
Perutz, M. F. (1956). Isomorphous replacement and phase determination in non-centrosymmetric space groups. Acta Cryst. 9, 867–873.
Perutz, M. F. (1997). Keilin and the molteno. In Selected topics in the history of biochemistry: personal reflections, V, edited by G. Semenza & R. Jaenicke, pp. 57–67. Amsterdam: Elsevier.
Rossmann, M. G. (1960). The accurate determination of the position and shape of heavy-atom replacement groups in proteins. Acta Cryst. 13, 221–226.








































to end of page
to top of page