International
Tables for Crystallography Volume H Powder diffraction Edited by C. J. Gilmore, J. A. Kaduk and H. Schenk © International Union of Crystallography 2018 |
International Tables for Crystallography (2018). Vol. H, ch. 2.5, pp. 120-121
Section 2.5.2.1.2. Diffraction-vector cones in laboratory coordinates^{a}Bruker AXS Inc., 5465 E. Cheryl Parkway, Madison, WI 53711, USA |
Fig. 2.5.3(b) shows the diffraction-vector cone corresponding to the diffraction cone in the laboratory coordinate system. C is the centre of the Ewald sphere. The diffraction condition can be given by the Laue equation aswhere s_{0} is the unit vector representing the incident beam, s is the unit vector representing the diffracted beam and H_{hkl} is the reciprocal-lattice vector. Its magnitude is given asin which d_{hkl} is the d-spacing of the crystal planes (hkl). It can be easily seen that it is the Bragg law in a different form. Therefore, equation (2.5.2) is the Bragg law in vector form. In the Bragg condition, the vectors s_{0}/λ and s/λ make angles θ with the diffracting planes (hkl) and H_{hkl} is normal to the (hkl) crystal plane. In order to analyse all the X-rays measured by a 2D detector, we extend the concept to all scattered X-rays from a sample regardless of the Bragg condition. Therefore, the index (hkl) can be removed from the above expression. H is then a vector which takes the direction bisecting the incident beam and the scattered beam, and has dimensions of inverse length given by . Here 2θ is the scattering angle from the incident beam. The vector H is referred to as the scattering vector or, alternatively, the diffraction vector. When the Bragg condition is satisfied, the diffraction vector is normal to the diffracting lattice planes and its magnitude is reciprocal to the d-spacing of the lattice planes. In this case, the diffraction vector is equivalent to the reciprocal-lattice vector. Each pixel in a 2D detector measures scattered X-rays in a given direction with respect to the incident beam. We can calculate a diffraction vector for any pixel, even if the pixel is not measuring Bragg scattering. Use of the term `diffracted beam' hereafter in this chapter does not necessarily imply that it arises from Bragg scattering.
For two-dimensional diffraction, the incident beam can be expressed by the vector s_{0}/λ, but the diffracted beam is no longer in a single direction, but follows the diffraction cone. Since the direction of a diffraction vector is a bisector of the angle between the incident and diffracted beams corresponding to each diffraction cone, the trace of the diffraction vectors forms a cone. This cone is referred to as the diffraction-vector cone. The angle between the diffraction vector and the incident X-ray beam is 90° + θ and the apex angle of a vector cone is 90° − θ. It is apparent that diffraction-vector cones can only exists on the −X_{L} side of the diffraction space.
For two-dimensional diffraction, the diffraction vector is a function of both the γ and 2θ angles, and is given in laboratory coordinates asThe direction of the diffraction vector can be represented by its unit vector, given bywhere h_{L} is a unit vector expressed in laboratory coordinates and the three components in the square brackets are the projections of the unit vector on the three axes of the laboratory coordinates, respectively. If γ takes all values from 0 to 360° at a given Bragg angle 2θ, the trace of the diffraction vector forms a diffraction-vector cone. Since the possible values of θ lie within the range 0 to 90°, h_{x} takes only negative values.