Tables for
Volume H
Powder diffraction
Edited by C. J. Gilmore, J. A. Kaduk and H. Schenk

International Tables for Crystallography (2018). Vol. H, ch. 2.9, p. 192

Figure 2.9.5 

W. van Beeka* and P. Pattisona,b

aSwiss–Norwegian Beamlines at ESRF, CS 40220, 38043 Grenoble CEDEX 9, France, and bLaboratory for Quantum Magnetism, Institute of Physics, Ecole Polytechnique Federale de Lausanne, CH-1015 Lausanne, Switzerland
Correspondence e-mail:

[Figure 2.9.5]
Figure 2.9.5

(a) In situ synchrotron diffraction patterns (selected region) of an LiCoO2/Li cell collected during cell charging. Below: overview of a Bellcore flat three-electrode plastic Li-ion cell (b) with an enlargement (c) of the assembly steps during which all the separated laminates are brought together by a thermal fusion process via a laminator. The thicknesses of the plastic Li-ion cells assembled for in situ X-ray experiments were about 0.4/0.5 mm. A derived version of the Bellcore plastic Li-ion battery with a beryllium window thermally glued to the packing envelope on one side is shown in (d). Adapted from Morcrette et al. (2002[link]) with permission from Elsevier.