modify your search
 Results for DC.creator="U." AND DC.creator="W." AND DC.creator="Arndt" in section 6.1.4 of volume F
Crystal monochromators
Arndt, U. W.  International Tables for Crystallography (2012). Vol. F, Section 6.1.4.4, p. 166 [ doi:10.1107/97809553602060000818 ]
... a very high thermal conductivity, especially at low temperatures. References Arndt, U. W., Duncumb, P., Long, J. V. P., Pina, L. & Inneman, ...

Other focusing collimators
Arndt, U. W.  International Tables for Crystallography (2012). Vol. F, Section 6.1.4.3, pp. 165-166 [ doi:10.1107/97809553602060000818 ]
... 191, 289-350. MacDonald, C. A., Owens, S. M. & Gibson, W. M. (1999). Polycapillary X-ray optics for microdiffraction. J. ...

Focusing collimators for microfocus sources
Arndt, U. W.  International Tables for Crystallography (2012). Vol. F, Section 6.1.4.2, p. 165 [ doi:10.1107/97809553602060000818 ]
... is improved. A suitable microfocus tube has been described by Arndt, Long & Duncumb (1998); mirrors used with this tube were discussed by Arndt, Duncumb et al. (1998). The tube design allows the ... distance between the tube and the sample inconveniently long. References Arndt, U. W., Duncumb, P., Long, J. V. P., Pina, ...

X-ray mirrors
Arndt, U. W.  International Tables for Crystallography (2012). Vol. F, Section 6.1.4.1, pp. 164-165 [ doi:10.1107/97809553602060000818 ]
... in an appropriate way along the length of the plate. Arndt, Long & Duncumb (1998) described a monolithic mirror-bending block in ... machined slots for two orthogonal pairs of curved mirrors (after Arndt, Duncumb et al., 1998). Mirror plates for these benders ... Inc. (1998). Sales literature. Osmic Inc., Troy, Michigan, USA. Arndt, U. W., Long, J. V. P. & Duncumb, P. (1998) ...

Beam conditioning
Arndt, U. W.  International Tables for Crystallography (2012). Vol. F, Section 6.1.4, pp. 164-166 [ doi:10.1107/97809553602060000818 ]
... in an appropriate way along the length of the plate. Arndt, Long & Duncumb (1998) described a monolithic mirror-bending block in ... machined slots for two orthogonal pairs of curved mirrors (after Arndt, Duncumb et al., 1998). Mirror plates for these benders ... is improved. A suitable microfocus tube has been described by Arndt, Long & Duncumb (1998); mirrors used with this tube were ...

powered by swish-e
























































to end of page
to top of page